Here’s what happens if an inspector finds unpermitted work in a house you want to buy: the report documents what the inspector can see. A home inspection can’t show whether a permit was pulled, because a permit isn’t something you can see in a house. So the permit question goes to the seller and to the local building or code office. You’ll want to ask it before your inspection contingency ends.
Letting the question slide is the risk. A buyer who treats it as small talk can close on work no code official inspected, with the inspection contingency spent and no question ever put to the seller or the local code office. That’s your decision to make, and you can make it on purpose. This is general information for buyers, not engineering, legal or financial advice.
Does a Home Inspection Show Whether Work Was Permitted?
No. A home inspection is a visual examination, and our inspectors report what they see in the house. Permit records aren’t part of the house itself. So whether work was permitted is a question for the seller and for the local building or code office. You’ll want an answer from each.
During a home inspection, one of our licensed inspectors performs a visual examination of the structure and all major systems. We document every finding with photographs. And we inspect everything from a century-old rowhome in Philadelphia to new construction in Delaware County. As a general rule, a visual inspection can report only what’s visible and accessible on the day. It doesn’t show the paperwork behind the work.
Those two views fit together. The report tells you what’s there and what our inspector observed. The seller and the code office tell you what was permitted. You’ll want both before you decide.
The same permit question can come up on any house that’s had work done, and our post on buying a flipped house covers it for that kind of purchase.
What Does Pennsylvania’s Permit Rule Say?
The Pennsylvania Department of Labor and Industry’s page on the Uniform Construction Code says, “The UCC requires property owners to obtain a construction or building permit before starting any work.” In plain terms, the page describes the permit as the owner’s step, taken before the work starts.
The same page says, “Inspections are also necessary in several cases, including construction or changes to commercial or residential buildings, electrical, gas, mechanical or plumbing systems, and the installation of swimming pools or hot tubs.”
As a general rule, work done without a permit hasn’t gone through the permit step the Department’s page describes, so no one with a code role has looked at it on your behalf. The office that keeps the permit records for a house is the local building or code office. That’s where to confirm what was permitted.
What Does the Seller Have to Disclose?
Pennsylvania’s Real Estate Seller Disclosure Law says a seller who intends to transfer real property “shall disclose to the buyer any material defects with the property known to the seller by completing all applicable items in a property disclosure statement”. In other words, the seller discloses by filling out that statement.
The law says the disclosure form shall call for disclosures on a list of subjects. One of them is “Additions, remodeling and structural changes to the property.”
The law also says, “The seller is not obligated by this chapter to make any specific investigation or inquiry in an effort to complete the property disclosure statement.” It says, too, that the seller “shall not fail to disclose a known material defect”. And if information is unknown or not available to the seller, the law says the seller may make a disclosure based on “the best information available to the seller”.
For you as the buyer, the seller’s answers on additions and remodeling are a place to start. Read them closely. Then ask who did the work and what permits were taken out. The seller’s answers and the code office’s records are separate pieces of information, so one doesn’t stand in for the other.
What Happens If an Inspector Finds Unpermitted Work, and What Do You Do Next?
The report documents what the inspector saw and photographed. What happens next is up to you, and it runs inside your inspection contingency. You ask the questions and gather the answers from the seller and the local building or code office. Then you decide, before the contingency deadline passes.
- Ask the seller in writing what permits were taken out for the work, and who did it.
- Confirm with the local building or code office, the office that keeps the records, and treat its answer and the seller’s answer as separate pieces of information.
- Read the seller’s disclosure answers on additions, remodeling and structural changes.
- Ask your inspection company what the report says about the parts of the work that were visible.
- Bring any question about the condition of electrical, gas, plumbing or structural work to a qualified specialist in that trade.
Keep the seller’s answer and the office’s answer side by side. If they line up, you know more than you did. If they don’t, that gap is a question to raise before the contingency ends.
As a general rule, a written inspection report gives you something specific to bring to the seller. Our post on what to ask for after a home inspection covers the repair request itself.
Questions about the agreement of sale and the contingency deadline are for your real estate agent.
Frequently Asked Questions About Unpermitted Work
Can a home inspector tell me if a permit was pulled?
A home inspection is a visual examination, and a permit record isn’t something the house can show. Ask the seller what permits were taken out. Then confirm with the local building or code office.
Does the seller have to tell me about work done without a permit?
The Real Estate Seller Disclosure Law says a seller shall disclose known material defects by completing the property disclosure statement, and the subjects on that form include additions, remodeling and structural changes. The same law says the seller isn’t obligated to make any specific investigation or inquiry to complete the statement. Whether a particular seller’s answers met the law is a question for a real estate attorney.
Should unpermitted work stop me from buying?
There isn’t a single rule we can give you. Before the contingency ends, you weigh what the work is alongside the answers you get from the seller and the local building or code office. Your real estate agent handles the contract side of that decision.
Who keeps the permit records for a house?
The local building or code office keeps the records. Ask the seller what permits were taken out, then confirm with that office. The two answers are separate pieces of information, so it helps to have both.
Will the inspection report mention the work?
The report documents what the inspector can see and photograph. So a finished basement or an addition the inspector sees can appear as a documented finding about its visible parts. The report speaks to what’s visible, not to whether a permit was pulled. Our reports are delivered within 24 hours.
Ask About Permits Before You Close
Inspection Professionals’ written report documents every finding with photographs and is delivered within 24 hours, so you can see the evidence for each finding rather than a summary.
Once you know what the report documents and what the seller says was permitted, add what the local code office confirms. Together, those answers can help you decide whether to accept the house as is, ask for a repair or bring in a specialist before closing.
A full home inspection is the written report to have in hand while you decide.
If you’re buying in Bucks County, Montgomery County, Philadelphia or Delaware County and weighing what happens if an inspector finds unpermitted work in a house you want, contact Inspection Professionals about a full home inspection.